Linux version 6.6.7 (olek@mocarz) (i686-buildroot-linux-uclibc-gcc.br_real (Buildroot 2022.05-1002-g1500b7d5c8) 12.1.0, GNU ld (GNU Binutils) 2.38) #38 Fri Dec 15 22:21:27 CET 2023
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000037fcffff] usable
BIOS-e820: [mem 0x0000000037fd0000-0x0000000037fddfff] ACPI data
BIOS-e820: [mem 0x0000000037fde000-0x0000000037feffff] ACPI NVS
BIOS-e820: [mem 0x0000000037ff0000-0x0000000037ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fecc0000-0x00000000fecc0fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
APIC: Static calls initialized
SMBIOS 2.6 present.
DMI: Hewlett-Packard HP t5550 Thin Client/158Ch, BIOS 786R9 v1.03 11/29/2010
tsc: Fast TSC calibration using PIT
tsc: Detected 997.474 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x37fd0 max_arch_pfn = 0x100000
MTRR map: 6 entries (4 fixed + 2 variable
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
found SMP MP-table at [mem 0x000ff780-0x000ff78f]
initial memory mapped: [mem 0x00000000-0x01ffffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FA170 000024 (v02 ACPIAM)
ACPI: XSDT 0x0000000037FD0100 000054 (v01 112910 XSDT1308 20101129 MSFT 00000097)
ACPI: FACP 0x0000000037FD0290 0000F4 (v04 112910 FACP1308 20101129 MSFT 00000097)
ACPI: DSDT 0x0000000037FD0430 00499F (v02 786R9  786R9103 00000103 INTL 20051117)
ACPI: FACS 0x0000000037FDE000 000040
ACPI: FACS 0x0000000037FDE000 000040
ACPI: APIC 0x0000000037FD0390 000060 (v02 112910 APIC1308 20101129 MSFT 00000097)
ACPI: MCFG 0x0000000037FD03F0 00003C (v01 112910 OEMMCFG  20101129 MSFT 00000097)
ACPI: OEMB 0x0000000037FDE040 000082 (v01 112910 OEMB1308 20101129 MSFT 00000097)
ACPI: HPET 0x0000000037FDA430 000038 (v01 112910 VIA HPET 20101129 MSFT 00000097)
ACPI: SSDT 0x0000000037FDE0D0 00023A (v01 AMI    P001PM   00000001 INTL 20051117)
ACPI: Reserving FACP table memory at [mem 0x37fd0290-0x37fd0383]
ACPI: Reserving DSDT table memory at [mem 0x37fd0430-0x37fd4dce]
ACPI: Reserving FACS table memory at [mem 0x37fde000-0x37fde03f]
ACPI: Reserving FACS table memory at [mem 0x37fde000-0x37fde03f]
ACPI: Reserving APIC table memory at [mem 0x37fd0390-0x37fd03ef]
ACPI: Reserving MCFG table memory at [mem 0x37fd03f0-0x37fd042b]
ACPI: Reserving OEMB table memory at [mem 0x37fde040-0x37fde0c1]
ACPI: Reserving HPET table memory at [mem 0x37fda430-0x37fda467]
ACPI: Reserving SSDT table memory at [mem 0x37fde0d0-0x37fde309]
0MB HIGHMEM available.
895MB LOWMEM available.
mapped low ram: 0 - 37fd0000
low ram: 0 - 37fd0000
Zone ranges:
DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Normal   [mem 0x0000000001000000-0x0000000037fcffff]
HighMem  empty
Movable zone start for each node
Early memory node ranges
node   0: [mem 0x0000000000001000-0x000000000009efff]
node   0: [mem 0x0000000000100000-0x0000000037fcffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000037fcffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 97 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x808
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x11068201 base: 0xfed00000
[mem 0x38000000-0xfebfffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Kernel command line: panic=30 printk.devkmsg=on tsc=unstable  
tsc: Marking TSC unstable due to boot parameter
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Built 1 zonelists, mobility grouping on.  Total pages: 227438
mem auto-init: stack:off, heap alloc:off, heap free:off
Initializing HighMem for node 0 (00000000:00000000)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Memory: 883416K/916920K available (2391K kernel code, 3413K rwdata, 668K rodata, 17196K init, 1144K bss, 33504K reserved, 0K cma-reserved, 0K highmem)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS: 2304, nr_irqs: 72, preallocated irqs: 16
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230628
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Calibrating delay loop (skipped), value calculated using timer frequency.. 1994.94 BogoMIPS (lpj=9974740)
process: using mwait in idle threads
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
CPU: Centaur VIA Nano U3500@1000MHz (family: 0x6, model: 0xf, stepping: 0x8)
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Kernel not compiled with retpoline
Spectre V2 : Vulnerable
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Vulnerable
L1TF: Kernel not compiled for PAE. No mitigation for L1TF
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
MMIO Stale Data: Unknown: No mitigations
x86/fpu: x87 FPU will use FXSAVE
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Performance Events: 
core: Welcome to zhaoxin pmu!
core: Version check pass!
no PMU driver, software events only.
signal: max sigframe size: 1440
NMI watchdog: Perf NMI watchdog permanently disabled
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes, linear)
NET: Registered PF_NETLINK/PF_ROUTE protocol family
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor ladder
cpuidle: using governor menu
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: _OSC evaluation for CPUs failed, trying _PDC
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
PCI: Using MMCONFIG for extended config space
PCI: Using host bridge windows from ACPI
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 7 GPEs in block 00 to 0F
ACPI: Enabled 1 GPEs in block 10 to 1F
ACPI: \_SB_.PCI0.SBRG.URP1: New power resource
ACPI: \_SB_.PCI0.SBRG.URP2: New power resource
ACPI: \_SB_.PCI0.SBRG.FDDP: New power resource
ACPI: \_SB_.PCI0.SBRG.LPTP: New power resource
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig Segments HPX-Type3]
acpi PNP0A03:00: PCIe port services disabled
acpi resource window ([0x400000000-0xfffffffff] ignored, not CPU addressable)
acpi PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff window] (conflicts with Adapter ROM [mem 0x000ce800-0x000d07ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x38000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1106:0410] type 00 class 0x060000
pci 0000:00:00.1: [1106:1410] type 00 class 0x060000
pci 0000:00:00.2: [1106:2410] type 00 class 0x060000
pci 0000:00:00.3: [1106:3410] type 00 class 0x060000
pci 0000:00:00.4: [1106:4410] type 00 class 0x060000
pci 0000:00:00.5: [1106:5410] type 00 class 0x060000
pci 0000:00:00.6: [1106:6410] type 00 class 0x060000
pci 0000:00:00.7: [1106:7410] type 00 class 0x060000
pci 0000:00:01.0: [1106:7122] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:00:01.0: reg 0x14: [mem 0xfc000000-0xfcffffff]
pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:00:01.0: reg 0x30: [mem 0xfbff0000-0xfbffffff pref]
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1106:9170] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfbfec000-0xfbfeffff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:03.0: [1106:a410] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: [1106:b410] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [1106:c410] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: [1106:d410] type 01 class 0x060400
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.4: [1106:e410] type 00 class 0x060000
pci 0000:00:0f.0: [1106:9001] type 00 class 0x01018a
pci 0000:00:0f.0: reg 0x20: [io  0xfc00-0xfc0f]
pci 0000:00:0f.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:0f.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:0f.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:0f.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.0: reg 0x20: [io  0xdc00-0xdc1f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.1: reg 0x20: [io  0xd880-0xd89f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.2: reg 0x20: [io  0xd800-0xd81f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.3: reg 0x20: [io  0xd480-0xd49f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
pci 0000:00:10.4: reg 0x10: [mem 0xfbfebc00-0xfbfebcff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:11.0: [1106:8410] type 00 class 0x060100
pci 0000:00:11.7: [1106:a353] type 00 class 0x060000
pci 0000:00:13.0: [1106:b353] type 01 class 0x060401
pci 0000:00:14.0: [1106:3288] type 00 class 0x040300
pci 0000:00:14.0: reg 0x10: [mem 0xfbfe4000-0xfbfe7fff 64bit]
pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.1: PCI bridge to [bus 02]
pci 0000:00:03.2: PCI bridge to [bus 03-04]
pci 0000:00:03.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.2:   bridge window [mem 0xfe000000-0xfeafffff]
pci 0000:00:03.2:   bridge window [mem 0xf8000000-0xfaffffff 64bit pref]
pci 0000:05:00.0: [14e4:1692] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xfebf0000-0xfebfffff 64bit]
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:00:03.3: PCI bridge to [bus 05]
pci 0000:00:03.3:   bridge window [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:06: extended config space not accessible
pci 0000:00:13.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:13.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:13.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:13.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:13.0:   bridge window [mem 0x38000000-0xdfffffff window] (subtractive decode)
pci 0000:00:13.0:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI: Interrupt link LNKA configured for IRQ 11
ACPI: PCI: Interrupt link LNKB configured for IRQ 5
ACPI: PCI: Interrupt link LNKC configured for IRQ 15
ACPI: PCI: Interrupt link LNKD configured for IRQ 3
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKE disabled
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKF disabled
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKG disabled
ACPI: PCI: Interrupt link LNKH configured for IRQ 10
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x37fd0000-0x37ffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:02: [io  0x0680-0x068f] has been reserved
system 00:02: [io  0x1000-0x100f] has been reserved
system 00:02: [io  0x0a00-0x0a2f] has been reserved
system 00:02: [io  0x1100-0x117f] has been reserved
system 00:02: [io  0x1200-0x123f] has been reserved
pnp 00:04: [dma 3]
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:05: [io  0x0800-0x087f] has been reserved
system 00:05: [io  0x0400-0x041f] has been reserved
system 00:05: [mem 0xfed01000-0xfed013ff] has been reserved
system 00:05: [mem 0xfed02000-0xfed02fff] has been reserved
system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:05: [mem 0xfed05000-0xfed05fff] has been reserved
system 00:05: [mem 0xfff00000-0xffffffff] has been reserved
system 00:05: [mem 0xfecc0000-0xfecc0fff] could not be reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:01.0 BAR 6 [mem 0x000c0000-0x000dffff]
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0x00100000-0x37ffffff] could not be reserved
system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 1, 8192 bytes, linear)
UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.1: PCI bridge to [bus 02]
pci 0000:00:03.2: PCI bridge to [bus 03-04]
pci 0000:00:03.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.2:   bridge window [mem 0xfe000000-0xfeafffff]
pci 0000:00:03.2:   bridge window [mem 0xf8000000-0xfaffffff 64bit pref]
pci 0000:00:03.3: PCI bridge to [bus 05]
pci 0000:00:03.3:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:13.0: PCI bridge to [bus 06]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x38000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfeafffff]
pci_bus 0000:03: resource 2 [mem 0xf8000000-0xfaffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:06: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:06: resource 7 [mem 0x38000000-0xdfffffff window]
pci_bus 0000:06: resource 8 [mem 0xf0000000-0xfebfffff window]
pci 0000:00:03.0: disabling DAC on VIA PCI bridge
pci 0000:00:03.1: disabling DAC on VIA PCI bridge
pci 0000:00:03.2: disabling DAC on VIA PCI bridge
pci 0000:00:03.3: disabling DAC on VIA PCI bridge
pci 0000:00:13.0: disabling DAC on VIA PCI bridge
PCI: CLS 32 bytes, default 64
workingset: timestamp_bits=30 max_order=18 bucket_order=0
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
Freeing unused kernel image (initmem) memory: 17196K
Write protecting kernel text and read-only data: 3060k
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
softdog:              soft_reboot_cmd=<not set> soft_active_on_boot=0
io scheduler mq-deadline registered
lp: driver loaded but no devices found
Non-volatile memory driver v1.3
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci-pci 0000:00:10.4: EHCI Host Controller
ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:10.4: debug port 1
ehci-pci 0000:00:10.4: irq 23, io mem 0xfbfebc00
ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
vt1211: Found VT1211 chip at 0x1100, revision 2
hwmon_vid: Unknown VRM version of your x86 CPU
vt1211 vt1211.4352: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
SCSI subsystem initialized
libata version 3.00 loaded.
pata_via 0000:00:0f.0: version 0.3.4
scsi host0: pata_via
scsi host1: pata_via
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: DUMMY
ata1.00: CFA:  1024MB  ATA Flash Disk, ADAA408J, max MWDMA2
ata1.00: 2001888 sectors, multi 0: LBA 
scsi 0:0:0:0: Direct-Access     ATA       1024MB  ATA Fla 408J PQ: 0 ANSI: 5
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 20, io port 0x0000dc00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 22, io port 0x0000d880
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io port 0x0000d800
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 23, io port 0x0000d480
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
snd_hda_intel 0000:00:14.0: Force to non-snoop mode
snd_hda_intel 0000:00:01.1: CORB reset timeout#1, CORBRP = 0
snd_hda_intel 0000:00:01.1: no codecs found!
sd 0:0:0:0: [sda] 2001888 512-byte logical blocks: (1.02 GB/977 MiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
snd_hda_codec_generic hdaudioC1D0: autoconfig for Generic: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_generic hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC1D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC1D0:    mono: mono_out=0x0
snd_hda_codec_generic hdaudioC1D0:    inputs:
snd_hda_codec_generic hdaudioC1D0:      Mic=0x1a
watchdog: watchdog0: nowayout prevents watchdog being stopped!
watchdog: watchdog0: watchdog did not stop!
EXT4-fs (sda1): mounted filesystem ce36316c-ee5d-4133-a89f-fb2552e615d4 r/w with ordered data mode. Quota mode: disabled.
Broadcom BCM57780 500:01: attached PHY driver (mii_bus:phy_addr=500:01, irq=POLL)
tg3 0000:05:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 64:31:50:f3:ce:62
tg3 0000:05:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:05:00.0 eth0: dma_rwctrl[76180000] dma_mask[32-bit]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: button: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: button: Power Button [PWRF]
input: PC Speaker as /devices/platform/pcspkr/input/input3
Warning: Processor Platform Limit event detected, but not handled.
Consider compiling CPUfreq support into your kernel.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
tg3 0000:05:00.0 eth0: Link is down
random: crng init done
tg3 0000:05:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:05:00.0 eth0: Flow control is on for TX and on for RX
NET: Registered PF_PACKET protocol family